Coin Mech Interface PCB - Hardwired - RM5 / SP / QL / NRI
An interface board that allows your faulty or outdated coin mechanism to the following:
Microcoin SP or QL
This allows you to hardwire your mech into your machine by connecting the correcting wires to the terminal block which has the outputs: Meter, Credit (O/P), +12V and 0V Gnd.
UNIS connectors can also be added so it allows you to plug directly into any UNIS machine that has either a 4 or 6 pin connector. Please let us know in the cart notes if you need a specific one adding.
Purposely designed and built in house to be reliable and small so it can be mounted discretely within the machine.
Please select the correct combination of connectors you need from the drop-down.
If you require a spare part that is not listed, please get in touch via email at firstname.lastname@example.org or call us on 01507 441144.