Coin Mech Interface Kit 115mm - Spares
This coin mech interface is the complete kit you will need when replacing a defective coin mech that uses the same entry mech. The SP coin mech is a very good quality, superior interceptor. This kit is for a mech that requires a 115mm front plate.
- Microcoin SP Coin Mechanism
- Coin Mech Interface PCB - Hardwired - RM5 / SP
- 10 Way Flat Ribbon Coin Mech Loom
- Microcoin SP Front Plate - 115mm
If you require a special coin configuration, please email us at email@example.com after you purchase the mechanism.
If you require a spare part that is not listed, please get in touch via email at firstname.lastname@example.org or call us on 01507 441144.