Coin Mech Interface Kit 155mm - Spares

This coin mech interface is the complete kit you will need when replacing a defective coin mech that uses the same entry mech. The SP coin mech is a very good quality, superior interceptor. This kit is for a mech that requires a 155mm front plate.

  • Microcoin SP Coin Mechanism
  • Coin Mech Interface PCB - Hardwired - RM5 / SP
  • 10 Way Flat Ribbon Coin Mech Loom
  • Microcoin SP Front Plate - 155mm

If you require a special coin configuration, please email us at after you purchase the mechanism.

If you require a spare part that is not listed, please get in touch via email at or call us on 01507 441144.