Blog

Displaying 7 blog articles tagged with "grabber crane".

Grabber Crane Won’t Accept Coins

If your grabber crane will not take coins, the first thing to check is the wiring to the coin mech. The two most...

When a sensor is blocked, usually the crane accepts the payment for play but may show zero credit on the display and the...

If your grabber claw is continuously going up and down, it is most likely that the gantry cord is too short. Because the cord is...

If you maintain grabber crane machines, we suggest you keep spare working looms in stock so that you can swap them in to...

To remove the centre carriage on the gantry or replace it on an arcade grabber machine you: Disconnect the loom from the front part...

If you operate amusement arcade crane grabber machines, it is quite likely that you will need to remove the crane gantry rail or replace it during...

To restring your grab claw as a part of your maintenance you will need the following: Thin-nose pliers, a torch or lighter, scissors or...