Blog

Displaying 25 blog articles.

Problem - Grabber Claw Keeps Going Up and Down

If your grabber claw is continuously going up and down, it is most likely that the gantry cord is too short. Because the cord is...

If you maintain grabber crane machines, we suggest you keep spare working looms in stock so that you can swap them in to...

Is it a good idea to add in special prizes onto arcade pusher machine bed? Including prizes in an arcade pusher...

Problems with the grabber claw not picking up? If you maintain grabber crane machines, we suggest you keep spare working looms...

This month Instance Automatics celebrate 30 years of working with Janet and John Kiddie Rides! In this day and age, it is a testament...

To remove the centre carriage on the gantry or replace it on an arcade grabber machine you: Disconnect the loom from the front part...

If you operate amusement arcade crane grabber machines, it is quite likely that you will need to remove the crane gantry rail or replace it during...

To restring your grab claw as a part of your maintenance you will need the following: Thin-nose pliers, a torch or lighter, scissors or...

EAG Expo in London has always been an important exhibition for Instance Automatics Ltd, a family business with over...