Blog

Displaying 11 blog articles tagged with "fix arcade machine".

How to Calibrate a Fantastic Prize Skill Cut Machine

Calibrating a skill cutting game is crucial to the success of the machine! In this blog we show you how to calibrate the UNIS Fantastic Prize...

Make sure your mech has power. You should see the green LED light. Next, press the button 5 times until the...

Please make sure your mech has power. Check you can see the green LED light. Next, press the button 2 times until...

If your grabber crane will not take coins, the first thing to check is the wiring to the coin mech. The two most...

When a sensor is blocked, usually the crane accepts the payment for play but may show zero credit on the display and the...

Please make sure your mech has power. You should see the green LED light.Next, press the button 4 times until the LED changes to red in...

If you maintain grabber crane machines, we suggest you keep spare working looms in stock so that you can swap them in to...

To remove the centre carriage on the gantry or replace it on an arcade grabber machine you: Disconnect the loom from the front part...

If you operate amusement arcade crane grabber machines, it is quite likely that you will need to remove the crane gantry rail or replace it during...